Select the items you wish to purchase:
Select the drip manifold that best suits your situation.
Remove the spray nozzle from riser and wrap the riser threads with thread seal tape.
Twist the manifold onto the riser.
Cut 1/4" drip tubing so it is long enough to go from the manifold to the plant to be watered.
Unscrew a cap from one of the manifold ports and slide the tubing over the port.
Install a drip sprinkler or emitter by sliding onto the end of the of the 1/4" tubing. (Depending on the sprinkler/emitter selected you may also need to install use a 1/4" drip stake.)
Repeat steps 4-6 with the remaining manifold ports and turn on the water.
If 1/4" tubing slips off manifold ports, you may need to install 1/4" tubing high pressure clamps.